2023 Wacker Neuson ET42

Call for Price

Call for Price

Key Features

New/Used New
Usage25 Hours
Availability In Stock
LocationMueller Implement & Rental
Condition Excellent

Product Features

Description

ET42 Tracked Conventional Excavator: The boost for every construction site



Full speed ahead: the ET42 mini-excavator combines proven technology with a large dose of innovation to lead the 4-metric ton class. It has the usual high lifting and digging forces, as well as fast work cycles. Thanks to modern technologies, emissions are reduced while efficiency is increased. The ET42's powerful engine meets Stage V emissions standards. The intuitive operating concept means this powerhouse is both user-friendly and comfortable for the operator, while offering an excellent view of the working area.

Key Features
  • Flexible cylinder rod protection: The cylinders and the cylinder rods are protected from damage thanks to the plastic rails, which lengthens their service life and saves costs. Due to their flexible material, they return to their original shape after an impact. Their appearance and characteristics are completely retained.
  • Load Sensing Flow Sharing: Load Sensing Flow Sharing enables precise and efficient control of the excavator. The machine adjusts to the load and the joystick movements are always kept the same for the operator. The hydraulics work more efficiently, saving energy and ultimately costs. But it also makes operation easier for the operator. Load-sensing systems help to regulate the flow rate according to demand. The less power is used, the lower the fuel consumption
  • 3-point kinematics: With 3-point kinematics, the conventional bucket linkage has been taken to a new level. This "3-bolt" design extends the bucket's angle of rotation to 200 degrees - 10% more than conventional bucket linkage. This increases the vertical dig depth as well as the digging forces. This eliminates the need to reposition the excavator as often, significantly increasing efficiency.
  • Active Working Signal (AWS): The red LED strip running diagonally over the engine hood lights up when the joystick control is pressed down. This signals to bystanders nearby that the excavator is ready for operation and can be moved at any time.
  • LED work lights: The durable LED headlights enable safe working through the all-round lighting in the dark. Optimal illumination of the work area ensures a higher level of machine utilization, even in dark visibility conditions. The headlights on the chassis ensure that the work area is well illuminated, even when the machine is panning. The best illumination and long service life as a result of the LED technology.
  • Guided track rollers outside: In particular for lifting heavy loads, the externally located guide track rollers as well as an optimized weight distribution give the excavators a higher lateral stability.
  • Hydraulic swivelling dozer blade: The swivel blade can be swiveled straight or variably by up to 25 degrees to the left or right. This way, the machine does not have to be reset in one direction as often during longer-lasting backfilling tasks. In the floating position, the dozer blade automatically follows the contour of the ground, so that the driver doesn’t have to make adjustments. Infinitely variable swivelling with floating position for more flexibility and efficiency.
  • High cab comfort with excellent ergonomics and air-conditioning system: The intuitive operating concept allows for the simple and comprehensive control of the excavator. The joystick, 3.5-inch display, jog dial, and keypad are used to operate the machine, store attachments, control auxiliary circuits or set oil quantities. The well-placed discharge nozzles create a pleasant cab temperature and enable fatigue-free working. The air conditioning system enables a cool down of up to 16 ° C/61° F (at an outside temperature of 38°C/100° F) and this in half the specified ISO standard time.
  • Stage V emission standards: To implement this European emissions directive, we install state-of-the-art engine technologies equipped with exhaust gas aftertreatment systems. DPF regeneration takes place automatically when required and during normal working operation. Therefore, no standstill regeneration is necessary and the working cycle is not interrupted. The more stable coolant temperature increases the lifetime of the diesel engine and, thanks to thermal management, also the efficiency of the cab heater. New technology to increase efficiency and reduce exhaust emissions - reducing harmful diesel particulate, hydrocarbons, and carbon monoxide emissions. The filter does not require additives, nor a burner or additional power sources, and the operator is not required to intervene manually.
  • Jog dial: The jog dial system, familiar from the automotive area, including a clear display, allows intuitive selection of the right operating settings via a press-push button as well as various settings via a keypad. ECO mode is the standard mode for efficient and fuel-saving work; HI mode stands for maximum pump performance and fast, powerful work and LOW mode for extremely precise, sensitive work.
  • New positioning of the exhaust system: Hot exhaust gases are directed upwards, avoiding possible damage to people or objects. This is a particular advantage in gardening and landscaping (e.g. trench and canal construction). In addition, the stirring up of dust on the ground is considerably reduced.
  • Hydraulic thumb: The optional hydraulic thumb offers, beside a conventional bucket application, a grip function, which expands the spectrum of applications. With this additional grip function, material can be cleared away quite easily.
  • USB port: Combined with a radio, the option of convenient cellphone charging is available.
  • 10 large tie-downs: 6 large lashing eyes on the chassis frame and 4 more on the superstructure ensure easy and fast tie and secure transport of the machine. Die Ösen sind perfekt platziert für eine sichere Befestigung der Maschine und sie sind auch für große Haken gut geeignet.
  • Innovative front windshield system: The windshields can be adjusted to any condition on the construction site. Closed, they are water- and windproof. The upper front window can be pushed under the cabin roof. The lower pane serves as splash protection. The lower windshield slides behind the upper window, making it ideal for talking with colleagues. If necessary, both windows are pushed below the cabin roof, where they are stored safely. The two-part front window allows for optimal ventilation in the cabin in any weather. In addition, it makes it easier to communicate with the operator. A separate removal and storage of the window is a thing of the past. Significantly lower risk of damage or loss; higher level of operating comfort
  • Windshield wiper motor integrated in A-pillar: The wiping direction from top to bottom provides better cleaning, while the new positioning of the motor in the A-pillar and its cabling prevent any restriction of visibility.
  • Safe entry and exit: Through the repositioning of the control level bracket and the armrest, it has generated space and minimized the risk of unintentional operation of a machine function.
  • Hose guidance by swiveling bracket: Optimum hose routing through the swiveling bracket provides the best possible protection for the hoses against external influences, which extends their service life. The field of vision is not restricted and abrasion of the hoses is significantly reduced.
  • Very good all-round visibility: The design of the machine has been specially adapted to the needs of the operator in terms of optimum visibility. For example, the right front track is very visible in the normal sitting position, which significantly increases safety for the operator and the surrounding area. Everything in view - ideal view of the attachment and of the right front track as well as the side and partial rear section of the machine
Technical Data
  • Superstructure turning speed: 9 1/min
  • Travel speed: 3 m/H (4.8 km/h)
  • Break Out Force Bucket: 43.8 kN
  • Break Out Force Lift Arm: 20.8 kN
  • Length: 220.2 in. (5,594 mm)
  • Operating weight (min.-max.): 8,889 - 11,477.3 lb. (4,032 - 5,206 kg)
  • Digging depth (max.): 139.5 in. (3,544 mm)
  • Width: 68.9 in. (1,750 mm)
  • Height: 102.7 in. (2,608 mm)
  • Weight: 8,415.05 lb. (3,817 kg)
  • Cylinder: 3,0
  • Cylinder capacity: 101.4 in.3 (1,662 cm3)
  • Effective power: 43.6 HP (32.5 KW)
  • Nominal Engine speed: 2,000 1/min
  • Battery capacity (nom. value): 77 Ah
  • Engine type: Diesel engine
  • Exhaust-gas limit: EU Stage V
  • Manufacturer: Perkins
  • Engine designation: 403J - E17T
  • Operating pressure: 3,552.5 psi (245 bar)
  • Flow rate max.: 23.8 gal./mi (90 l/min)
  • Operating pressure slewing gear: 206 bar
  • Hydraulikpump: Axial piston pump
  • Shipping weight: 8,415.1 lb. (3,817 kg)
  • Protection class: Stage V
Dimensions
  • Height with cab: 98.26 in.
  • Height of dozer blade: 14.2 in.
  • Total height with rotating beacon: 102.76 in.
  • Width of upper carriage: 67.77 in.
  • Width of cab: 38.61 in.
  • Width travel gear: 68.95 in.
  • Width of dozer blade: 68.95 in.
  • Transport length short shovel arm: 202.75 in.
  • Transport length long shovel arm: 202.99 in.
  • Digging depth max., short shovel arm: 131.75 in.
  • Digging depth max., long shovel arm: 139.63 in.
  • Piercing depth max., short shovel arm: 83.29 in.
  • Piercing depth max., long shovel arm: 90.34 in.
  • Piercing height max., short shovel arm: 205.27 in.
  • Piercing height max., long shovel arm: 210.4 in.
  • Dumping height max., short shovel arm: 140.78 in.
  • Dumping height max., long shovel arm: 145.9 in.
  • Digging radius max., short shovel arm: 216.27 in.
  • Digging radius max., long shovel arm: 223.71 in.
  • Max. reach at ground level (short shovel arm): 211.81 in.
  • Max. reach at ground level (long shovel arm): 219.46 in.
  • Tail swing radius: 52.6 in.
  • Boom offset max. (to center of bucket right side): 19.42 in.
  • Boom offset max. (to center of bucket left side): 20.96 in.
  • Stacking height max. (dozer blade above surface): 16.47 in.
  • Digging depth max. (dozer blade below surface): 22.2 in.
  • Length travel drive: 86.6 in.
  • Max. swivel angle (arm system to the left): 70 deg.
  • Max. swivel angle (arm system to the right): 55 deg.
  • Boom swing radius center: 85.7 in.
  • Boom swing radius right: 81.2 in.
  • Boom swing radius left: 71.71 in.
Standard Components
  • Perkins 403J-E17T diesel engine, 43.6 HP, 3-cylinder, turbocharged, liquid cooled, Stage V emissions compliant
  • Rubber track: 350 mm
  • Dozer blade
  • LED work light mounted on lifting arm
  • Active Working Signal on the engine hood (red LED strips that signal the machine’s readiness to work)
  • Toolkit, including grease press and operator's manual
  • Canopy (and cabin) complies with current ROPS, TOPS and FOPS regulations
  • Adjustable comfort seat with artificial leather cover and safety belt
  • Load Sensing Flow Sharing hydraulic system (max. discharge volume 90 L/min, max. working pressure 245 bar)
  • Hydraulic pilot control via joystick operation
  • Valve control according to ISO, DIN, SAE, PCSA and EURO
  • Auxiliary hydraulic connections for 2 directions of travel on shovel arm (AUX I)
  • Automatic 2-speed transmission, 2 travel speeds automatically switched, 2nd gear manually lockable
  • Hydraulically servo-controlled and cushioned foot pedals and forward + reverse travel lever
  • Hydraulic oil cooler
  • Parking brake for undercarriage and slewing system
  • Proportional control for AUX I; adjustable and programmable discharge volume via jog dial
  • EquipCare telematics hardware - subscription ready
Edition E2103
  • Long dipperstick
  • Thumb preparation kit
  • Protective guard for bucket and dipper cylinders
  • Hydraulic Quick Coupler (HQC) with Easy Lock control system
  • Auxiliary hydraulics (two directions) w/direct to tank setting
  • Flat faced couplers on dipper
  • ISO/SAE control pattern change over valve (electronic button in cab)
  • Work lights - 2 front, 3 in chassis (LED)
  • Rear counterweight - 441 lbs (200 kg)
  • Drive signal (travel alarm)
Edition E2102
  • Angle dozer blade, 4-way (25° right/left) with float position
  • Long dipperstick
  • Thumb preparation kit
  • Protective guard for bucket and dipper cylinders
  • Hydraulic Quick Coupler (HQC) with Easy Lock control system
  • Auxiliary hydraulics (two directions) w/direct to tank setting
  • Flat faced couplers on dipper
  • ISO/SAE control pattern change over valve (electronic button in cab)
  • Work lights - 2 front, 3 in chassis (LED)
  • Rear counterweight - 441 lbs (200 kg)
  • Drive signal (travel alarm)
Edition E2101: Cabin, Long Dipper, HQC
  • Cabin with AC, 1 door, split front window
  • Radio ready, wiring and speakers installed
  • Long dipperstick
  • Thumb preparation kit
  • Protective guard for bucket and dipper cylinders
  • Hydraulic Quick Coupler (HQC) with Easy Lock control system
  • Auxiliary hydraulics (two directions) w/direct to tank setting
  • Flat faced couplers on dipper
  • ISO/SAE control pattern change over valve (electronic button in cab)
  • Work lights - 2 front, 3 in chassis (LED)
  • Rear counterweight - 441 lbs (200 kg)
  • Drive signal (travel alarm)
Edition E2101: Cabin, Long Dipper, HQC, Angle Blade
  • Cabin with AC, 1 door, split front window
  • Radio ready, wiring and speakers installed
  • Angle dozer blade, 4-way (25° right/left) with float position
  • Long dipperstick
  • Thumb preparation kit
  • Protective guard for bucket and dipper cylinders
  • Hydraulic Quick Coupler (HQC) with Easy Lock control system
  • Auxiliary hydraulics (two directions) w/direct to tank setting
  • Flat faced couplers on dipper
  • ISO/SAE control pattern change over valve (electronic button in cab)
  • Work lights - 2 front, 3 in chassis (LED)
  • Rear counterweight - 441 lbs (200 kg)
  • Drive signal (travel alarm)
NOTES:
Please note that the product range may vary depending on the country. Under certain circumstances, the contents / products shown here may not be available in your country. The illustrations, equipment, and data shown may also differ from the current product range in your country. Optional extras may be shown that are subject to an additional charge. Subject to changes. Delivery times can vary - subject to prior sale. With the selection of different options, the technical data of the products can vary accordingly. Please note that equipment cannot be changed for editions. The engines shown may differ from the current delivery range in your country. Special equipment is depicted here that may be subject to extra charge. Subject to change without notice.

Engine

Engine Type 03J-E17T diesel engine, 43.6 HP, 3-cylinder, turbocharged, liquid cooled, Stage V emissions compliant
Engine Manufacturer Perkins
Horsepower 43.6 HP (32.5 KW)

General

Length 220.2 in. (5,594 mm)
Width 68.9 in. (1,750 mm)
Height 102.7 in. (2,608 mm)
Weight 8,415.05 lb. (3,817 kg)
Max Dig Depth 139.5 in. (3,544 mm)

Shopping Tools